| Customization: | Available |
|---|---|
| Structure: | Axial Plunger Pump |
| Cylinder Number: | Single Cylinder |
|
Still deciding? Get samples of US$ 100/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Product Number | Control Mode | Specifications | Working Pressure | Characteristic |
| A4FM |
DR,FR;
DRG,EO; LR,MA; EM,HD; HS,DS;
HW-Hydraulic Control, Mechanical Servo
|
16,22,28,40,71, 125,250,500 |
Common pressure: 40MPa, Peak pressure: 45MPa |
A4FM Axial Piston Quantitative Motor with Swashplate Structure for Hydraulic Driving in Open Loop Flow is proportional to driving speed and displacement. Excellent oil absorption performance Very low noise - Long service life - Allow the use of combined motors - Axle drive for assembling other motors |
| Safety Instruction | ||||
| 1, During start-up and operation, the pump shell must be filled with hydraulic oil (injected into the shell cavity). It must be started at low speed without load until the system is completely emptied. | ||||
| 2,When parked for a long time, the oil can be discharged from the shell through the working pipeline. When restarting, enough oil should be injected into the shell. | ||||
| 3,The minimum oil suction pressure of the nozzle S shall not be reduced to less than 0.8 bar. | ||||
| 4,he axis is horizontal to the bottom. When mounting on the tank, the installation position of "axis level, suction port facing bottom" is not allowed. | ||||
| Suggestion | ||||
| 1,During start-up and operation, the pump shell must be filled with hydraulic oil (injected into the shell cavity). It must be started at low speed without load until the system is completely emptied. | ||||
| 2,When parked for a long time, the oil can be discharged from the shell through the working pipeline. When restarting, enough oil should be injected into the shell. | ||||
| 3,The minimum oil suction pressure of the nozzle S shall not be reduced to less than 0.8 bar. | ||||
| 4,The axis is horizontal to the bottom. When mounting on the tank, the installation position of "axis level, suction port facing bottom" is not allowed. | ||||
| 5,Pump position below minimum oil level in tank (standard) | ||||
| 6,Fill the axial plunger pump before starting through the highest position of the shell outlet. | ||||
| Noted | ||||
| 1,Maximum permissible pipette length Hmax = 800 mm; | ||||
| 2,Minimum Permissible Pressure of Oil Nozzle S (Minimum Oil Absorption Pressure) | ||||
| R910918915 | A4FM71 /10W-PPB01 |
| R902541615 | A A4F M 71 /10W-PPB01 -S2235 |
| R910923512 | A A4F M 71 /10W-PPB01 -SO266 |
| R910918916 | A A4F M 71 /10W-PPB02 |
| R910918917 | A A4F M 71 /10W-PZB01 |
| R910996740 | A A4F M 71 /10W-PZB01 -S1007 |
| R910922779 | A A4F M 71 /10W-PZB01 -SO266 |
| R910918918 | A A4F M 71 /10W-PZB02 |
| R910938989 | A A4F M 71 /10W-PZB02 -SO435 |
| R910924064 | A A4F M 71 /10W-VPB01 |
| R910966476 | A A4F M 71 /10W-VPB02 |
| R902486719 | A A4F M 71 /10W-VZB02 |
| R902445306 | A AA4F M 71 /10W-VCD527D ES1537 |
| R900065273 | A4FM 71/10W-PZB01 |
| R902464082 | AE A4F M 71 /10W-PPB01 |
| R902481126 | AL A4F M 71 /10W-PPB01 |
| R910968411 | AL A4F M 71 /10W-PZB01 |
| R902539938 | AL A4F M 71 /10W-VPB01 |
| R902486720 | AL A4F M 71 /10W-VZB02 |
| R902487017 | LA4FM125/30W+LA4FM71/10W |
| R902444745 | TW AA4F M 71 /10W-VCDN00 -S1536 |
| R902445308 | TW AA4F M 71 /10W-VCDN00 -S1537 |
| R902418604 | A4FM125 /30W-PPB01 |
| R902476462 | A A4F M 125 /30W-PPB01 -SO266 |
| R902454091 | A A4F M 125 /30W-PPB02 |
| R902423073 | A A4F M 125 /30W-PZB01 |
| R902484261 | A A4F M 125 /30W-PZB02T03 |
| R902545511 | A A4F M 125 /30W-PZB02T03 -SO460 |
| R902425458 | A A4F M 125 /30W-VPB01 |
| R902407569 | A A4F M 125 /30W-VZB01 |
| R902427006 | A A4F M 125 /30W-VZB01 -S1024 |
| R902545016 | A A4F M 125 /30W-VZB02 |
| R902487016 | A A4F M 125 /30W-VZB02K33 -S1874 |
| R902542369 | A AA4F M 125 /30W-PSD607D ES1561 |
| R902546315 | A AA4FM 125/30W-PSD607 ES1719 |
| R902557491 | A AA4FM 125/30W-PSD607D ES1719 |
| R902432271 | AE A4F M 125 /30W-PZB01 |
| R902484290 | AL A4F M 125 /30W-PZB02T03 |
| R902545512 | AL A4F M 125 /30W-PZB02T03 -SO460 |
| R902486716 | AL A4F M 125 /30W-VZB02K33 -S1874 |
| R902423883 | A A4F M 250 /30W-PPB01 |
| R902403334 | A A4F M 250 /30W-PPB01 -S1075 |
| R902443910 | A A4F M 250 /30W-PPB02 |
| R902415928 | A A4F M 250 /30W-PZB01 |
| R902464016 | A A4F M 250 /30W-PZB02 |
| R902419613 | A A4F M 250 /30W-PZB02 -S1292 |
| R902555551 | A A4F M 250 /30W-PZB02 -SO255 |
| R902465450 | A A4F M 250 /30W-PZB02T03 |
| R902515752 | A A4F M 250 /30W-PZB52K07 -S1625 |
| R902415794 | A A4F M 250 /30W-VPB01 |
| R902416188 | A A4F M 250 /30W-VPB01 -S1075 |
| R902455492 | A AA4F M 250 /30W-VSD52K07 ES1625 |
| R987034130 | A4FM250/30W-NZB01 |
){kind=link}