High Pressure Rexroth Hydraulic Pump of A10vso140 for Sale

• Customization: Available
• Structure: Axial Plunger Pump
• Cylinder Number: Single Cylinder
• Model NO.: A10VSO140
• Drive Mode: Hydraulic Driven Reciprocating Pump
• Pump Shaft Position: Horizontal
• Type: Radial
• Power: Hydraulic
• Straight Shaft Swashplate Piston Type: Pressureoil
• Radial Plunger Pump Type: Axial Flow
• Material: Cast Iron
• Pressure: High Pressure
• Application: Engineering, Construction, Metallurgy Machinery...
• Warranty: One Year
• Transport Package: Standard Export Wooden Case
• Specification: A10VSO28/45/71/100/140
• Trademark: Neutral Label
• Origin: China
• HS Code: 8413503190
• Production Capacity: 5000 Pieces/Year

Product Description

 

Series	A10VSO Series Variable Piston Pumps (Series 31)
Specifications	A10VSO28, A10VSO45, A10VSO71, A10VSO100, A10VSO140
Working pressure	Rated pressure: 28 MPa, Peak pressure: 35 MPa
Control mode: DG - Two-Point Direct Control DR- Pressure Control DRG - Remote Pressure Control DFR, DFR1 - Pressure and Flow Control DFLR - Pressure, Flow and Power Control ED-Electric Hydraulic Control	Characteristic: - Axial piston variable pump with swashplate structure is used for hydrostatic transmission in open circuit. - Flow is proportional to transmission speed and displacement. - By adjusting the angle of the rotating swashplate, the stepless change of flow rate can be realized. - Two shell outlets. - Excellent oil absorption characteristics. - Low noise level. - Long service life. - Axial and radial load capacity of transmission shaft. - Ideal power-weight ratio. - Various control ranges. - Short control time. - The pump is driven by a through shaft, and can be loaded with gear pumps or axial piston pumps less than or equal to the same specifications, that is, 100% through shaft drive.

 

Size				18	28	45	71	100	140
Version				Standard
Displacement		Vg max	cm³	18	28	45	71	100	140
geometric, per revolution
Nominal pressure		pnom	bar	280	280	280	280	280	280
Maximum pressure		pmax	bar	350	350	350	350	350	350
Maximum speed	at Vg max	nnom	rpm	3300	3000	2600	2200	2000	1800
Flow	at Vg max and nnom	qV nom	l/min	59	84	117	156	200	252
	at Vg max and n = 1500 rpm	qV 1500	l/min	27	42	68	107	150	210
Power	at qV nom and pnom	P	kW	30	39	55	73	93	118
	at qV 1500 and pnom	P 1500	kW	12.6	20	32	50	70	98
Torque	at Vg max and pnom	M	Nm	80	125	200	316	445	623
Weight (approx.)		m	kg	12	15	21	33	45	60

Safety instructions:

- A10VSO pump is designed to be used in open circuit.
- The project planning, assembling and commissioning of the axial piston unit must be carried out by qualified personnel.
- Before using the axial plunger unit, please read the corresponding manual completely.
- If necessary, please ask Bosch Rexroth for these handbooks.
- During and shortly after operation, there may be a risk of burning of the axial piston unit (especially the electromagnet). Appropriate safety measures (such as wearing protective clothing) should be taken.
- As per the different working conditions (working pressure, oil temperature) of the axial piston unit, the characteristics may change.
- Work pipeline oil outlet:
· Oil nozzles and fixed threads are designed for maximum specified pressure. Machine or system manufacturers must ensure that the safety factor of connecting components and pipes meets the specified working conditions (pressure, flow, hydraulic oil, temperature).
· Work pipeline nozzles and functional nozzles are only designed for hydraulic pipelines.
- Pressure cut-off and pressure control do not provide overvoltage protection. Separate relief valves are provided in the hydraulic system.
- The data and instructions contained here must be followed.
- The product has not been certified as a department that meets the requirements of DIN EN ISO 13849's general machine safety concept.
- The following tightening torque is used:
· Connector:
Refer to manufacturer's instructions for tightening torque of the joints used.
· Installation bolts: For installation bolts that meet the ISO metric thread standard of DIN 13 and the thread standard of ASME B1.1, we recommend that tightening torque be checked separately according to VDI 2230.
· Thread holes in the axial plunger unit:
The maximum allowable tightening torque MG Max is the maximum value for threaded holes and shall not exceed that value.
· Locking screw:
For the metal locking screw provided with the axial plunger unit, the tightening torque MV is required.